Forward Collision Warning Advanced Driver Assist System Powerful
(1) Forward Collision Warning
1. Safety Distance Alarm(TTC)” and “Forward Collision Warning” warns
drivers by the vehicle speed in accordance with distances between
the front car and the host car.
2.“Safety Distance Alarm(TTC)” informs the driver with audible alarm
when the vehicle reaches the preset distance(Level 1 ~ 5) in
accordance the vehicle speed.
3.“Forward Collision Warning(FCW)” warns the driver when the vehicle
approaches the front car more rapidly with audio and visual
4.“Forward Collision Warning(FCW)” warns at 0.4 seconds and within a
TTC range of 0.4 seconds by calculating relative speed and distance
of the front car.
5.“Safety Distance Alarm(TTC)” sensitivity can be changed in ADAS
6.“Proximity Warning” informs when the front vehicle exists within
1.5m(configurable) under 5 km/h. (3mph)
7. “Front Go” informs the front departs when the driver’s car and
the front car are on the stop.
8. Refer to the below image for “Safety Distance Alarm(TTC)” sensitivity level
* NOTE Clean any foreign matter and moisture from the where the
product will be installed.
Step 1: Attach the product to the windshield as close as to the
center of the vehicle widthwise. To enhance the performance of the
product, it is recommended to install the product between left
5cm(10inch) and right 5cm(10inch) in the center.
Step 2: Wire / Power Connection Please connect 6 pin extension cord
with either OBD-II adaptor (Option) or 6 Pin analog wire cable.
Further wiring diagram information,