HD 360 Degree Ip67 Car Parking Cameras System Internal four-
Channel DVR For Honda CRV
Type: 360 Car Parking Cameras
Place of origin: Guangzhou China
This product in the body forward, backward, left, or right in four
directions to install wide angle cameras, acquisition of multi
channel video image distortion correction, image stitching,
synthesizing a body around
a bird's eye view sense, and finally in the center console is
displayed on the screen, and allows the driver
a clear view around the vehicle for obstructions and understand the
relative position and distance of obstructions, helping drivers
easy parking. Not only convenient for driver's special road eyes
wide and full
real-time video, accident evidence, protect legal rights of drivers
A ) Intelligent Parking Assist
By watching the images from display not the rearview mirror to
judge the distance between car and roadblock while driver is
backing car. Fewer mistakes on Judgment.
B) Expand vision scope
When it makes a turn, front & back 180 degree range of image
could be seen through the display equipment; Knowing if there are
cars on straight direction without move out.
C) Pass by the narrow road & meet vehicles
The distance between car body and left & right obstacle could
be clearly seen by left & right cameras. Help you pass narrow
road & complicated section easily.
D) Driving trajectory correcting
When the car is moving on, keep the front view camera working; If
the car offsets track, it will show on the
display to help correcting the driving trajectory.
E) "Black Box" function
In case of any accident or car scraping, our system can store
images of every direction to SD card; This data will be used for
technical evaluation during events.
Install the front view camera
1. Open the hood, drill hole in available position of car logo,
lead the camera cable through the hole to
2. Arrange the cables along with edge of car head end to gauge
Install the left &right view camera
Open the door, separate the door cover and remove the left &
right rearview mirror from the door.
Disconnect the mirror lens, and make a hole at the bottom of
rearview mirror frame with size 18.5MM
Separate the rearview mirror frame & frame holder.
Fix the left or right camera on the hole, and arrange cables well.
Assemble the rearview mirror and connect to the door, tie well
& lead the camera cables to the bottom of
gauge board.; Reinstall the door cover.
PAL / NTSC
Auto Electronic Exposure
Electronic Rolling Shutter